Sliding windows and doors system with high performance thermal insulation for masonry walls, aluminium facades, green houses or showcases, made using elemnts from the MB-59S or MB-59S Casement. Sliding doors, especially large ones “increase” living space by uniting the inside with a terrace/garden.

MB-Slide and MB-Slide ST sliding doors can use glass panes up to 26mm thick and can be built into 2 to 6 modules. All elements are manufactured compliant to current legal requirements and ensure the best technical parameters.

Construction depth is 37mm for the wings (except MB-Slide ST horizontal profiles), 50mm (2 tracks) and 97mm (3 tracks) for the frames. The same construction depth for the MB-Slide and the MB-59S, MB-59S Casement, MB-59S Pivot and MB-59SE allows any combination between these systems to be built. Frames with depth other then 50mm can be combined using a special intermediary mullion.

The main differences between MB-Slide and MB-Slide ST are: wing profile construction as well as manufacturing technology and glazing. MB-Slide profiles have 3 chambers, are cut at 45 degree angle and assembled with proper corners and later battered. Glass installation is done using rods and gaskets. MB-Slide ST profiles have a single chamber and are assmbled with screws. Glass installation is done at assembly time.